Rough Country
4 Inch Lift Kit

$2,999.95

By Rough Country -

#ROU 67450

Confirm this item fits below.
Your Vehicle
Does NOT fit 2-door models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

Description

Give your Jeep a total transformation with Rough Country's 4in X-Series Suspension Lift. This all-inclusive kit comes with everything you need to give your vehicle aggressive good looks and improved off-road performance! This kit features a set of front and rear upper and lower adjustable control arms with a high-clearance design, allowing you to dial in the exact ride you desire! Each kit also comes with lifted coil springs and coil correction plates, providing lift height and impeccable vibration dampening on any terrain. For those who are serious about flexing, crawling, and pushing your Jeep to the limits, this kit features an upgraded Forged Adjustable Track Bar. Made of forged steel, this 16lb Track Bar boast a beefy construction that will dwarf stock equipment. Easy to install and fully adjustable on the vehicle. Best of all, this kit features Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.

Specifications

Shipping Options:

No Restrictions

Ships in Multiple Boxes:

Y

Title:

4 Inch Lift Kit - X-Series - Vertex - Jeep Wrangler Unlimited 2WD/4WD (07-18)

Category:

Vertex Kits

Prop 65 Yes/No:

Yes

Prop 65 (C, R or CR):

CR

Prop 65 Warning Label:

Warning - Both Cancer and Reproduction.JPG

Prop 65 - Short Label:

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Install Time:

7-8 hours

Front Components:

Lifted coil springs, Upper adjustable control arms, Lower adjustable control arms, Sway-bar quick disconnects, Forged adjustable track bar, Stainless steel braided brake lines, Shock relocation brackets, Hardware

Rear Components:

Lifted coil springs, Upper adjustable control arms, Lower adjustable control arms, Coil correction plates, Track bar drop bracket, Extended sway-bar links, Stainless steel braided brake lines, Hardware

Tire, Wheel, and Offset Info:

35x12.50R17:17x8.5:5x5.0:+0:-; 35x12.50R17:17x8.5:5x5.0:+1:-; 35x12.50R17:17x9:5x5.0:-12:-; 35x12.50R17:17x9:5x5.0:-6:-; 35x12.50R17:17x9:5x5.0:+0:-; 35x12.50R17:17x9:5x5.0:+1:-; 35x12.50R18:18x8.5:5x5.0:+0:-; 35x12.50R18:18x8.5:5x5.0:+1:-; 35x12.50R18:18x9:5x5.0:-12:-; 35x12.50R18:18x9:5x5.0:-6:-; 35x12.50R18:18x9:5x5.0:+0:-; 35x12.50R18:18x9:5x5.0:+1:-; 35x12.50R18:18x10:5x5.0:-19:-; 35x12.50R18:18x10:5x5.0:-18:-; 35x12.50R20:20x9:5x5.0:-12:-; 295 60R20:20x9:5x5.0:-12:-; 35x12.50R20:20x9:5x5.0:-6:-; 35x12.50R20:20x9:5x5.0:+0:-; 35x12.50R20:20x9:5x5.0:+1:-; 295 60R20:20x9:5x5.0:+1:-; 35x12.50R20:20x10:5x5.0:-19:-; 295 60R20:20x10:5x5.0:-19:-; 35x12.50R20:20x10:5x5.0:-18:-; 295 60R20:20x10:5x5.0:-18:-; 35x12.50R20:20x12:5x5.0:-44:Trimming Required; 35x12.50R22:22x10:5x5.0:-19:-; 35x12.50R22:22x10:5x5.0:-18:-; 35x12.50R22:22x12:5x5.0:-44:Trimming Required

Installation

Product Fitments

2007-2017:4WD:Jeep:Wrangler;2007-2010:2WD:Jeep:Wrangler